Standard accessories:
Beskrivelse
This machine is designed for sheet "cutting to length" - stamping – beading for manufacturing insulation pipes and pre cutted blanks for the universal cutting machine type EFM-L. It is installed ready-for-connection on a profile steel frame, consisting of:
- 3-shaft bend feed and straightening unit machine with rubber coated top shaft
- Roller blades for cutting to length
- Stamp unit for stamping connection holes on the longitudinal side of pipes
and for pre cutted blanks for the EFM-L machine
(e.g. from the program isometric sketches) - Hole diameter: 3,3 mm
- Left and right continuously adjustable punching distance 0..80 mm (without seam) and 0..35 (with seam)
- Selectable two row punching on every side
- Conically left and right
Full automatic beading unit with exchangeable beading rollers and mechanically adjustable depth pre-set. Included is:
- 1 set = 2 pairs of beading wheels b = 4 mm
- 1 set = 2 pairs of beading wheels b = 7 mm
For both sides, the option with/without beadings and the depth of the beadings is continuously and separate adjustable.
An uncoiling device type CA 1 or CA 2 is included in a movable design.
Control:
- High resolution touch panel
- Easy changeable languages
- Data entry up to 500 different cuttings in table form
- Up to 999 complex cutting routings can be stored into the database
-
Manual mode:
For setting up, all functions can be executed manually, one at a time.
-
Automatic:
preselectable:
– Operation with/without punching
– length of cutted blanks
– number of pieces
– positions of screw holes
– Seam left / right side
Full-automatic sheet border identification thanks to light beam (no start cut necessary)
Technical Data:
| Type | FLEX-CUT 1 | FLEX-CUT 2 | |
| Sheet width | mm | 1020 | 1270 |
| Sheet thickness (galvanized) <400 N/mm² | mm | 1,00 | 1,00 |
| Smallest cut | mm | 275 | 275 |
| Coil weight in case of drawing off from the pendulum coiler | kg | 500 | 500 |
| – in case of drawing off from the expansion mandrel bobbin | kg | 2000 | 2000 |
| Dimension (incl. coiler) LxB | m | 2,1 x 2,35 | 2,1 x 2,6 |
| Compressed air supply min. | bar | 8,0 | 8,0 |
| Connection voltage 3x 400 V / 50 Hz | x | x | |
| Conical arrangement of the punch holes | x | x | |
| Wireless connection with EFM-L | x | x | |
| Net weight approx. | kg | 1025 | 1125 |
- Full-automatic sheet edge identification by light beam (no start cut necessary)
- Wireless connection included!
- Connection to universal cutting machine type EFM-L: By entering all necessary data into EFM-L (e.g. from isometry programs), FLEX-CUT automatically takes them over via wireless connection and starts to cut them due to calculated length and punches the fastening holes
- Left and right distance from the edge 0 – 80 mm (without beading) and 0 – 35 mm (with beading)
