Beskrivelse
klCUTTING UNIT 1.25M X 0.7MM, NUMERICAL UNCOILING, ELECTRIC CUTTING, 3 SETS OF SLITTING BLADES
Electric cutting line, reference CLD-AE-CTE-REF, useful cutting width 1.25m, 0.7mm steel capacity, uncoiling and electric cut, slitting function with 3 sets of adjustable blades, equipped with a numerical control with touch screen 7"
Product plus:
- Automatic cutting cycles for a work without an operator
- Uncoiling speed 12m / mn
- Speed variator for a smooth work
- Uncoiling and electric cut
- With or without slitting, manual raising of the upper blades
- Easily movable in workshop
- Does not mark the metal sheet
Numerical control:
- Color touch screen 7’’
- Programming of several quantities and several lengths
- In Auto mode, selection of slitting or not per line of program
- Automatic cutting cycle
- Manual cycle to work on an ad hoc basis
- Manual or automatic speed adjustment
- Accuracy of cut + / - 2mm over 2m
Standard equipment:
- 3 sets of adjustable blades for slitting
- Drive by rubber rollers
- Ajustable input guides from 500 to 1250mm, on slides and locking handles
- Mount adapts to coils with a minimum width of 250 mm
- Guiding of the metal sheet on ball bearings
- Free roller at the entrance to guide the metal sheet in height
- Entry table with nylon protection to avoid marking under the metal sheet
- Sheet clamping device for cut, by rubber roller with reverse-lock device of the coil
- Electric cut by roller shear
- Length mesuring wheel
- 4 caster wheels with brakes